Infrared Doorbell, Wireless Motion Detector Alarm

Description

Infrared Induction Welcome Doorbell Custom Voice & 20 Songs Wireless Door Bell Chime PIR Motion Detector Alarm Home Store Office

The appearance is fashionable, and the installation is simple and convenient. It is suitable for store welcomes, closing r,eminders, welcomes, doorbells, emergency reminders, and flashing lights. It can be used in office buildings, homes, shops, factories and other places.

Features:

1) Humanized design, simple installation, no need for professional installation, ready to install and use

2) Infrared sensor, available day and night, regardless of day or night

3) There are 20 voices to choose from in the regular mode, including welcome voices from many countries.

4) Recording mode: You can record the sound you need or play it by voice.

5) The volume is adjustable in three levels. Adjust the sound to suit your needs according to your location.

6) High sensitivity, sensing distance 2-7 meters. Sensing range can be adjusted freely

7) Dual power supply, available battery/power supply (battery Short-pressord not included)

8) Bracket activity range: 360° free rotation without dead ends

Function Description:

1. Normal mode: Short press the song selection button to play the next song. There are a total of 20 sounds for you to choose from

2. Recording mode: Press and hold the recording button to play the “BI” sound to start recording. The recording time is 30 seconds. When Short-presses are up or halfway through, release the recording button to indicate the end of the recording and play BIBI twice.

3. Short press the recording button to announce “recording mode” and enter the recording mode. In the recording mode, the recorded voice will be broadcast the next time the infrared sensor is used. If you record again, the previous recording will be overwritten.

4. Power on/off button/volume button: three levels (large volume, medium volume, low volume), the volume adjustment has corresponding volume level prompts. Holding the key for 3 seconds is the power on/off key (with a beep), and it powers on by default after power-on.

Precautions:

1. Each time you install a battery or external power supply, this product needs to perform a “self-test” for about 5 to 10 seconds before entering normal working status.

2. Please try to use high-quality alkaline batteries and avoid using ordinary carbon-zinc batteries with short battery life and easy leakage of electrolyte.

3. Please avoid installing the product in a location directly facing a large change in air flow or close to a heat source (such as air-conditioning vents, exhaust fans, electriceffectss or heaters). Do not install it directly in a place exposed to the sun or rain.

Note: Due to the different monitor and a light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.

When using this product, install it on the top of the doorway or on the wall, and freely adjust the probe angle to the appropriate position. When Short-presses its detection range, it will automatically sound to remind the owner.

Function Description:

1. Normal mode: Short press the song selection button to play the next song. There are a total of 20 sounds for you to choose from

2. Recording mode: Press and hold the recording button to play the “BI” sound to start recording. The recording time is 20 seconds. When SShort-pressesare up or halfway through, release the recording button to indicate the end of the recording and play BIBI twice.

3. Short press the recording button to announce “recording mode” and enter the recording mode. In the recording mode, the recorded voice will be broadcast the next time the infrared sensor is used. If you record again, the previous recording will be overwritten.

4. Power on/off button/volume button: three levels (large volume, medium volume, low volume), the volume adjustment has corresponding volume level prompts. Holding the key for 3 seconds is the power on/off key (with a beep), and it powers on by default after power-on.